Physics – Condensed Matter – Materials Science
Scientific paper
2010-03-25
Journal of Sol-Gel Science and Technology 54, 3 (2010) 363
Physics
Condensed Matter
Materials Science
Scientific paper
10.1007/s10971-010-2204-y
La2Zr2O7 (LZO) formation of bulk powders and of films by Chemical Solution Deposition (CSD) process have been studied using propionates. The treatment involved a one step cycle in the reducing forming gas (Ar-5%H2) to be compatible with Ni-5at%W RABITS. Large amount of residual carbon was found in LZO powders formed in these conditions (10 wt %). The volume fraction of the cube texture in LZO films on Ni-5at%w RABITS was found to be a function of the speed of the gas flown above sample. This phenomenon is discussed in considering the C deposited from the carbon-containing gases emitted during the pyrolysis of the precursor. Using proper conditions (950 ^\circC and the speed of gas of 6.8\times10^{-2} m/s), LZO films with good surface crystallinity could be obtained on Ni-5at%W RABITS as demonstrated by X-ray diffraction, electron backscattered diffraction and RHEED. The existence of residual carbon in oxide films is a common question to films deposited by CSD processes under reducing condition.
Bacia Maria
Chaudouet P.
Fruchart Olivier
Jin L. H.
Li Chong Sheng
No associations
LandOfFree
Deposition of La2Zr2O7 Film by Chemical Solution Deposition does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.
If you have personal experience with Deposition of La2Zr2O7 Film by Chemical Solution Deposition, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Deposition of La2Zr2O7 Film by Chemical Solution Deposition will most certainly appreciate the feedback.
Profile ID: LFWR-SCP-O-556204