Physics – Condensed Matter – Materials Science
Scientific paper
2007-09-12
Dans Proceedings of 12th International Workshop on Thermal investigations of ICs - THERMINIC 2006, Nice : France (2006)
Physics
Condensed Matter
Materials Science
Submitted on behalf of TIMA Editions (http://irevues.inist.fr/tima-editions)
Scientific paper
A network identification by deconvolution (NID) method is applied to the thermal transient response of packaged and unpackaged microcoolers. A thin film resistor on top of the device is used as the heat source and the temperature sensor. The package and the bonding thermal resistances can be easily identified by comparing structure functions. High-speed coplanar probes are used to achieve a short time resolution of roughly 100ns in the transient temperature response. This is used to separate the thermal properties of the thin film from the substrate. The obtained thermal resistances of the buffer layer and Silicon substrate are consistent with the theoretical calculations. In order to estimate the superlattice thermal resistance and separate it from the thin SiNx layer deposited underneath the thin film resistive sensor, an order of magnitude faster thermal transient response is needed.
Fukutani Katsuyuki
Shakouri Ali
Singh Rahul
No associations
LandOfFree
Thermal Transient Characterization of Packaged Thin Film Microcoolers does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.
If you have personal experience with Thermal Transient Characterization of Packaged Thin Film Microcoolers, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Thermal Transient Characterization of Packaged Thin Film Microcoolers will most certainly appreciate the feedback.
Profile ID: LFWR-SCP-O-22205