The VIRGO large mirrors: a challenge for low loss coatings

Physics – Optics

Scientific paper

Rate now

  [ 0.00 ] – not rated yet Voters 0   Comments 0

Details

2

Scientific paper

Large optical components (diameter 350 mm), having extremely low loss at 1064 nm, are needed for the large-scale Michelson-type interferometer VIRGO. Today, ion beam sputtering is the only deposition technique able to produce optical components having such performances. Consequently, a large ion beam sputtering deposition system was built to coat large optics up to 700 mm in diameter: two large substrates may also be coated at the same time for interferometer arm symmetry problem. The performances of this coater are described in terms of layer uniformity on a large scale (wavefront) and optical losses (absorption and scattering). The VIRGO interferometer needs six main mirrors. The first set was ready in June 2002 and they have been installed on the VIRGO site (Italy). The optical performances of this first set are discussed. The requirements at 1064 nm are all satisfied. Indeed, the absorption level is close to 1 ppm (part per million), the scattering is lower than 5 ppm and the RMS wavefront of these optics is lower than 8 nm on 150 mm in diameter. Finally, some solutions are proposed to further improve these performances, especially the absorption level and the mechanical quality factor Q of the mirrors and the substrate wavefront before coating.

No associations

LandOfFree

Say what you really think

Search LandOfFree.com for scientists and scientific papers. Rate them and share your experience with other people.

Rating

The VIRGO large mirrors: a challenge for low loss coatings does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.

If you have personal experience with The VIRGO large mirrors: a challenge for low loss coatings, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and The VIRGO large mirrors: a challenge for low loss coatings will most certainly appreciate the feedback.

Rate now

     

Profile ID: LFWR-SCP-O-1132340

  Search
All data on this website is collected from public sources. Our data reflects the most accurate information available at the time of publication.