Physics – Condensed Matter – Materials Science
Scientific paper
2011-12-22
Physics
Condensed Matter
Materials Science
6 figures
Scientific paper
We have investigated the structural and magnetic properties of Sm(Co0.7Fe0.1Ni0.12Zr0.04B0.04)7.5 melt spun ribbons. Samples were arc melted then melt spun at 37 m/s up to 55 m/s to obtain ribbon for powdering. Annealing has been performed in argon atmosphere for (30 to 75) min at (600 to 870) oC. In as-spun ribbons the hexagonal SmCo7 (TbCu7-type of structure) of crystal structure has been determined from x-ray diffraction patterns, while fcc-Co has been identified as a secondary phase. After annealing, the 1:7 phase of the as-spun ribbons transforms into 2:17 and 1:5 phases. X-ray patterns for as-milled powders exhibit very broad peaks making it difficult to identify a precise structure but represent the 1:7 structure after annealing at low temperature (650 oC). TEM analysis shows a homogeneous nanocrystalline microstructure with average grain size of (30 to 80) nm. Coercivity values of (15 to 27) kOe are obtained from hysteresis loops traced up to a field of 5 T. The coercivity decreases as temperature increases, but it maintains values higher than 5 kOe at 380 oC. The maximum energy product at room temperature increases, as high as 7.2 MGOe, for melt-spun isotropic ribbons produced at higher wheel speeds. Anisotropic ribbons have a maximum energy product close to 12 MGOe.
Makridis Sofoklis S.
Tang Wei
No associations
LandOfFree
Structural and Magnetic Properties of Sm(Co0.7Fe0.1Ni0.12Zr0.04B0.04)7.5 Melt Spun Isotropic and Anisotropic Ribbons does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.
If you have personal experience with Structural and Magnetic Properties of Sm(Co0.7Fe0.1Ni0.12Zr0.04B0.04)7.5 Melt Spun Isotropic and Anisotropic Ribbons, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Structural and Magnetic Properties of Sm(Co0.7Fe0.1Ni0.12Zr0.04B0.04)7.5 Melt Spun Isotropic and Anisotropic Ribbons will most certainly appreciate the feedback.
Profile ID: LFWR-SCP-O-307501