Modeling with structure of resins in electonic compornents

Details Modeling with structure of resins in electonic compornents Modeling with structure of resins in electonic compornents

2007-09-12

arxiv.org/abs/0709.1860v1

Dans Proceedings of 12th International Workshop on Thermal investigations of ICs - THERMINIC 2006, Nice : France (2006)

Physics

Condensed Matter

Materials Science

Submitted on behalf of TIMA Editions (http://irevues.inist.fr/tima-editions)

Scientific paper

In recent years, interfacial fracture becomes one of the most important problems in the assessment of reliability of electronics packaging. Especially, underfill resin is used with solder joints in flip chip packaging for preventing the thermal fatigue fracture in solder joints. In general, the interfacial strength has been evaluated on the basis of interfacial fracture mechanics concept. However, as the size of devices decrease, it is difficult to evaluate the interfacial strength quantitatively. Most of researches in the interfacial fracture were conducted on the basis of the assumption of the perfectly bonding condition though the interface has the micro-scale structure and the bonding is often imperfect. In this study, the mechanical model of the interfacial structure of resin in electronic components was proposed. Bimaterial model with the imperfect bonding condition was examined by using a finite element analysis (FEA). Stress field in the vicinity of interface depends on the interfacial structure with the imperfect bonding. In the front of interfacial crack tip, the behavior of process zone is affected by interfacial structure. However, the instability of fracture for macroscopic crack which means the fracture toughness is governed by the stress intensity factor based on the fracture mechanics concept.

Affiliated with

Also associated with

No associations

Rating

Modeling with structure of resins in electonic compornents does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.

If you have personal experience with Modeling with structure of resins in electonic compornents, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Modeling with structure of resins in electonic compornents will most certainly appreciate the feedback.

Rate now

Comments { 0 }

Profile ID: LFWR-SCP-O-22575