Giant coercivity of dense nanostructured spark plasma sintered barium hexaferrite

Details Giant coercivity of dense nanostructured spark plasma sintered barium hexaferrite Giant coercivity of dense nanostructured spark plasma sintered barium hexaferrite

2011-03-30

arxiv.org/abs/1103.5840v1

Journal of Applied Physics 109 (2011) 07A708

Physics

Condensed Matter

Materials Science

Scientific paper

10.1063

Due to the limited rare-earth elements resources, ferrite magnets need to be improved drastically. Ideally, for a true hard magnet, the coercive field should be larger than the saturation magnetization, which is not yet realized for ferrites. Thus, an alternative can be found in making very fine grain ferrite magnets, but it is usually impossible to get small grains and dense material together. In this paper, it is shown that the spark plasma sintering method is able to produce approximately 80% of dense material with crystallites smaller than 100 nm. The as-prepared bulk sintered anisotropic magnets exhibits coercive field of 0.5 T which is approximately 60% of the theoretical limit and only a few percentage below that of loose nanopowders. As a result, the magnets behave nearly ideal (-1.18 slope in the BH plane second quadrant) and the energy product reaches 8.8 kJ m-3, the highest value achieved in the isotropic ferrite magnet to our knowledge.

Affiliated with

Also associated with

No associations

Rating

Giant coercivity of dense nanostructured spark plasma sintered barium hexaferrite does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.

If you have personal experience with Giant coercivity of dense nanostructured spark plasma sintered barium hexaferrite, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Giant coercivity of dense nanostructured spark plasma sintered barium hexaferrite will most certainly appreciate the feedback.

Rate now

Comments { 0 }

Profile ID: LFWR-SCP-O-567588