Physics – Classical Physics
Scientific paper
2009-08-02
J. of Machin. and Form. Technol. 1, 3-4 (2009) 1-18
Physics
Classical Physics
Scientific paper
In the workspace model of machining an experimental procedure is implemented to determine the elastic behaviour of the machining system. In an other work we have proposed a static characterization of the machining system. In this paper a dynamic characterization and vibration analysis have long been used for the detection and identification of machine tool condition. The natural frequencies of the lathe machining system (Ernault HN400 - France) according with three different situations with no cutting process were acquired. The system modal analysis is used to identify the natural frequencies. These ones and these obtained on the spindle numerical model by finite element method are compared. This research is validated by experimental tests being based to measures of the lathe machine tool frequencies domain. Main focus is to identify a procedure to obtain natural frequencies values for machine tool components in order to establish better conditions in the cutting process on the machine tool.
Bisu Claudiu-Florinel
Cahuc Olivier
Gérard Alain
K'Nevez Jean-Yves
Zapciu Miron
No associations
LandOfFree
Experimental study of machining system: dynamic characterization does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.
If you have personal experience with Experimental study of machining system: dynamic characterization, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Experimental study of machining system: dynamic characterization will most certainly appreciate the feedback.
Profile ID: LFWR-SCP-O-453121