Ethylene-Propylene Terpolymer Rubber Processing by Electron Beam Irradiation

Details Ethylene-Propylene Terpolymer Rubber Processing by Electron Beam Irradiation Ethylene-Propylene Terpolymer Rubber Processing by Electron Beam Irradiation

Apr 2007

adsabs.harvard.edu/cgi-bin/nph-data_query?bibcode=2007aipc..899..785m&link_type=abstract

SIXTH INTERNATIONAL CONFERENCE OF THE BALKAN PHYSICAL UNION. AIP Conference Proceedings, Volume 899, pp. 785-785 (2007).

Physics

Polymers And Plastics, Rubber, Synthetic And Natural Fibers, Organometallic And Organic Materials

Scientific paper

The investigations on the cross-linking by accelerated electrons of 6.23 MeV in lowly unsaturated elastomers of EPDM (ethylene-propylene terpolymer rubber) type are presented. Two rubber blends based EPDM were prepared and irradiated at different doses up to 250kGy: blend A - based on EPDM maleinized with polyethylene, zinc oxide, plasticizers, filler, and blend B - based on EPDM / PE (50 % EPDM and 50% polyethylene). Blends were prepared on a laboratory electrically heated rubber mill at temperatures of 150-160°C to enable the polyethylene (PE) melting to be reached. Plates of 150 × 150 × 2 mm were obtained in a laboratory electrical press at 170°C.

Affiliated with

Also associated with

No associations

Rating

Ethylene-Propylene Terpolymer Rubber Processing by Electron Beam Irradiation does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.

If you have personal experience with Ethylene-Propylene Terpolymer Rubber Processing by Electron Beam Irradiation, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Ethylene-Propylene Terpolymer Rubber Processing by Electron Beam Irradiation will most certainly appreciate the feedback.

Rate now

Comments { 0 }

Profile ID: LFWR-SCP-O-1681786