Physics – Fluid Dynamics
Scientific paper
2005-10-12
Physics
Fluid Dynamics
7 pages; 7 figures; 1 tex file+ 22 eps-files
Scientific paper
10.1140/epjb/e2006-00197-6
We present an experimental investigation of the agglomeration of microbubbles into a 2D microfoam and its flow in a rectangular microchannel. Using a flow-focusing method, we produce the foam in situ on a microfluidic chip for a large range of liquid fractions, down to a few percent in liquid. We can monitor the transition from separated bubbles to the desired microfoam, in which bubbles are closely packed and separated by thin films. We find that bubble formation frequency is limited by the liquid flow rate, whatever the gas pressure. The formation frequency creates a modulation of the foam flow, rapidly damped along the channel. The average foam flow rate depends non-linearly on the applied gas pressure, displaying a threshold pressure due to capillarity. Strong discontinuities in the flow rate appear when the number of bubbles in the channel width changes, reflecting the discrete nature of the foam topology. We also produce an ultra flat foam, reducing the channel height from 250 $\mu$m to 8 $\mu$m, resulting in a height to diameter ration of 0.02; we notice a marked change in bubble shape during the flow.
Graner Francois
Marmottant Philippe
Raven Jan-Paul
No associations
LandOfFree
Dry microfoams: Formation and flow in a confined channel does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.
If you have personal experience with Dry microfoams: Formation and flow in a confined channel, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Dry microfoams: Formation and flow in a confined channel will most certainly appreciate the feedback.
Profile ID: LFWR-SCP-O-685989