Physics – Classical Physics
Scientific paper
2010-05-10
IEEE Transactions on Antennas and Propagation, vol.58, no.5, pp.1551-1558, May 2010
Physics
Classical Physics
8 pages, 10 figures
Scientific paper
10.1109/TAP.2010.2044329
High-Impedance Surfaces (HIS) comprising lossy Frequency Selective Surfaces (FSS) are employed to design thin electromagnetic absorbers. The structure, despite its typical resonant behavior, is able to perform a very wideband absorption in a reduced thickness. Losses in the frequency selective surface are introduced by printing the periodic pattern through resistive inks and hence avoiding the typical soldering of a large number of lumped resistors. The effect of the surface resistance of the FSS and dielectric substrate characteristics on the input impedance of the absorber is discussed by means of a circuital model. It is shown that the optimum value of surface resistance is affected both by substrate parameters (thickness and permittivity) and by FSS element shape. The equivalent circuit model is then used to introduce the working principles of the narrowband and the wideband absorbing structure and to derive the best-suited element for wideband absorption. Finally, the experimental validation of the presented structures is presented.
Costa Filippo
Manara Giuliano
Monorchio Agostino
No associations
LandOfFree
Analysis and Design of Ultra Thin Electromagnetic Absorbers Comprising Resistively Loaded High Impedance Surfaces does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.
If you have personal experience with Analysis and Design of Ultra Thin Electromagnetic Absorbers Comprising Resistively Loaded High Impedance Surfaces, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Analysis and Design of Ultra Thin Electromagnetic Absorbers Comprising Resistively Loaded High Impedance Surfaces will most certainly appreciate the feedback.
Profile ID: LFWR-SCP-O-628154