A single-sided linear synchronous motor with a high temperature superconducting coil as the excitation system

Details A single-sided linear synchronous motor with a high temperature superconducting coil as the excitation system A single-sided linear synchronous motor with a high temperature superconducting coil as the excitation system

2010-10-22

arxiv.org/abs/1010.4775v1

Superconductor Science and Technology 23 (2010) 105015

Physics

Condensed Matter

Superconductivity

9 pages, 4 figures

Scientific paper

10.1088/0953-2048/23/10/105015

Thrust measurements were performed on a coil made of YBa2Cu3O7-d coated conductor acting as the excitation system of a single-sided linear synchronous motor. The superconducting coil was a single pancake in the shape of a racetrack with 100 turns, the width and effective lengths were 42 mm and 84 mm, respectively. The stator was made of conventional copper wire. At 77 K and a gap of 10 mm, with an operating direct current of I_DC=30 A for the superconducting coil and alternating current of I_AC=9 A for the stator coils, thrust of 24 N was achieved. With addition of an iron core, thrust was increased by 49%. With addition of an iron back plate, thrust was increased by 70%.

Affiliated with

Also associated with

No associations

Rating

A single-sided linear synchronous motor with a high temperature superconducting coil as the excitation system does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.

If you have personal experience with A single-sided linear synchronous motor with a high temperature superconducting coil as the excitation system, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and A single-sided linear synchronous motor with a high temperature superconducting coil as the excitation system will most certainly appreciate the feedback.

Rate now

Comments { 0 }

Profile ID: LFWR-SCP-O-661026