A comparsion of force sensors for atomic force microscopy based on quartz tuning forks and length extensional resonators

Physics – Condensed Matter – Mesoscale and Nanoscale Physics

Scientific paper

Rate now

  [ 0.00 ] – not rated yet Voters 0   Comments 0

Details

40 pages, 14 figures

Scientific paper

10.1103/PhysRevB.84.125409

The force sensor is key to the performance of atomic force microscopy (AFM). Nowadays, most AFMs use micro-machined force sensors made from silicon, but piezoelectric quartz sensors are applied at an increasing rate, mainly in vacuum. These self sensing force sensors allow a relatively easy upgrade of a scanning tunneling microscope to a combined scanning tunneling/atomic force microscope. Two fundamentally different types of quartz sensors have achieved atomic resolution: the 'needle sensor' that is based on a length extensional resonator and the 'qPlus sensor' that is based on a tuning fork. Here, we calculate and measure the noise characteristics of these sensors. We find four noise sources: deflection detector noise, thermal noise, oscillator noise and thermal drift noise. We calculate the effect of these noise sources as a factor of sensor stiffness, bandwidth and oscillation amplitude. We find that for self sensing quartz sensors, the deflection detector noise is independent of sensor stiffness, while the remaining three noise sources increase strongly with sensor stiffness. Deflection detector noise increases with bandwidth to the power of 1.5, while thermal noise and oscillator noise are proportional to the square root of the bandwidth. Thermal drift noise, however, is inversely proportional to bandwidth. The first three noise sources are inversely proportional to amplitude while thermal drift noise is independent of the amplitude. Thus, we show that the earlier finding that quoted optimal signal-to-noise ratio for oscillation amplitudes similar to the range of the forces is still correct when considering all four frequency noise contributions. Finally, we suggest how the signal-to-noise ratio of the sensors can be further improved and briefly discuss the challenges of mounting tips.

No associations

LandOfFree

Say what you really think

Search LandOfFree.com for scientists and scientific papers. Rate them and share your experience with other people.

Rating

A comparsion of force sensors for atomic force microscopy based on quartz tuning forks and length extensional resonators does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.

If you have personal experience with A comparsion of force sensors for atomic force microscopy based on quartz tuning forks and length extensional resonators, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and A comparsion of force sensors for atomic force microscopy based on quartz tuning forks and length extensional resonators will most certainly appreciate the feedback.

Rate now

     

Profile ID: LFWR-SCP-O-8458

  Search
All data on this website is collected from public sources. Our data reflects the most accurate information available at the time of publication.