Physics – Optics
Scientific paper
May 2010
adsabs.harvard.edu/cgi-bin/nph-data_query?bibcode=2010spie.7655e..94z&link_type=abstract
5th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technolog
Physics
Optics
Scientific paper
Future space telescopes require primary mirrors that have larger apertures and less mass than the current ones. To reduce the mass as much as possible, ultra-thin aspheric glass mirrors are used for the optical surface and a rigid, lightweight frame with actuators for support. The accuracy of the optical surface is actively maintained by adjusting the actuators. On the other hand, the ultra-thin spherical glass mirrors can be utilized to shape aspheric ones based on same active optics technology. The method can avoid the difficulty of manufacture and measure for large aspheric surface mirrors. We have built a measurement system for shaping a parabolic surface using a 340mm diameter ultra-thin spherical mirror. According to an existing active support system the theoretical accuracy of parabolic surface figure is presented. The test results show that the method of shaping aspheric ones from spherical surfaces is fully feasible: the surface quality is λ/5 RMS, which is in accord with the simulation analysis. If the best fitting sphere and the array of actuators be suitably chosen, and the initial figure accuracy of ultra-thin spherical surfaces can be increased, the accuracy of shaping aspheric surface will be improved.
Guo Peiji
Yu Jingchi
Zeng Chunmei
No associations
LandOfFree
Demonstration of shaping an aspheric from an ultra-thin spherical mirror using active supports does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.
If you have personal experience with Demonstration of shaping an aspheric from an ultra-thin spherical mirror using active supports, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Demonstration of shaping an aspheric from an ultra-thin spherical mirror using active supports will most certainly appreciate the feedback.
Profile ID: LFWR-SCP-O-801358