Optical layout for a 10m Fabry-Pérot Michelson interferometer with tunable stability

Physics – Optics

Scientific paper

Rate now

  [ 0.00 ] – not rated yet Voters 0   Comments 0

Details

Scientific paper

10.1088/0264-9381/29/7/075003

The sensitivity of high-precision interferometric measurements can be limited by Brownian noise within dielectric mirror coatings. This occurs, for instance, in the optical resonators of gravitational wave detectors where the noise can be reduced by increasing the laser beam size. However, the stability of the resonator and its optical performance often impose a limit on the maximally feasible beam size. In this article we describe the optical design of a 10\,m Fabry-P\'erot Michelson interferometer with tunable stability. Our design will allow us to carry out initial commissioning with arm cavities of high stability, while afterwards the arm cavity length can be increased stepwise towards the final, marginally stable configuration. Requiring only minimal hardware changes, with respect to a comparable "static" layout, the proposed technique will not only enable us to explore the stability limits of an optical resonator with realistic mirrors exhibiting inevitable surface imperfections, but also the opportunity to measure coating Brownian noise at frequencies as low as a few hundred Hertz. A detailed optical design of the tunable interferometer is presented and requirements for the optical elements are derived from robustness evaluations.

No associations

LandOfFree

Say what you really think

Search LandOfFree.com for scientists and scientific papers. Rate them and share your experience with other people.

Rating

Optical layout for a 10m Fabry-Pérot Michelson interferometer with tunable stability does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.

If you have personal experience with Optical layout for a 10m Fabry-Pérot Michelson interferometer with tunable stability, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Optical layout for a 10m Fabry-Pérot Michelson interferometer with tunable stability will most certainly appreciate the feedback.

Rate now

     

Profile ID: LFWR-SCP-O-547759

  Search
All data on this website is collected from public sources. Our data reflects the most accurate information available at the time of publication.