The effect of a thin weak layer covering a basalt block on the impact cratering process

Details The effect of a thin weak layer covering a basalt block on the impact cratering process The effect of a thin weak layer covering a basalt block on the impact cratering process

Apr 2012

adsabs.harvard.edu/cgi-bin/nph-data_query?bibcode=2012icar..218..751d&link_type=abstract

Icarus, Volume 218, Issue 2, p. 751-759.

Physics

Scientific paper

To clarify the effect of a surface regolith layer on the formation of craters in bedrock, we conducted impact-cratering experiments on two-layered targets composed of a basalt block covered with a mortar layer. A nylon projectile was impacted on the targets at velocities of 2 and 4 km s‑1, and we investigated the crater size formed on the basalt. The crater size decreased with increased mortar thickness and decreased projectile mass and impact velocity. The normalized crater volume, πV, of all the data was successfully scaled by the following exponential equation with a reduction length λ0: π=b0πY-b1exp(-λ/λ0), where λ is the normalized thickness T/Lp, T and Lp are the mortar thickness and the projectile length, respectively, b0 and b1 are fitted parameters obtained for a homogeneous basalt target, 10‑2.7±0.7 and ‑1.4 ± 0.3, respectively, and λ0 is obtained to be 0.38 ± 0.03. This empirical equation showing the effect of the mortar layer was physically explained by an improved non-dimensional scaling parameter, πY∗, defined by πY∗=Y/(ρup2), where up was the particle velocity of the mortar layer at the boundary between the mortar and the basalt. We performed the impact experiments to obtain the attenuation rate of the particle velocity in the mortar layer and derived the empirical equation of uv=0.50exp-λ1.03, where vi is the impact velocity of the projectile. We propose a simple model for the crater formation on the basalt block that the surface mortar layer with the impact velocity of up collides on the surface of the basalt block, and we confirmed that this model could reproduce our empirical equation showing the effect of the surface layer on the crater volume of basalt.

Affiliated with

Also associated with

No associations

Rating

The effect of a thin weak layer covering a basalt block on the impact cratering process does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.

If you have personal experience with The effect of a thin weak layer covering a basalt block on the impact cratering process, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and The effect of a thin weak layer covering a basalt block on the impact cratering process will most certainly appreciate the feedback.

Rate now

Comments { 0 }

Profile ID: LFWR-SCP-O-1117914