X-ray and optical profiler analysis of electroformed X-ray optics

Details X-ray and optical profiler analysis of electroformed X-ray optics X-ray and optical profiler analysis of electroformed X-ray optics

Apr 1988

adsabs.harvard.edu/cgi-bin/nph-data_query?bibcode=1988apopt..27.1558m&link_type=abstract

Applied Optics (ISSN 0003-6935), vol. 27, April 15, 1988, p. 1558-1563.

Physics

Optics

3

Electroforming, Grazing Incidence Telescopes, Mirrors, Optical Measurement, X Ray Analysis, X Ray Telescopes, Arrays, Computerized Simulation, Image Resolution

Scientific paper

Electroformed grazing incidence mirrors were tested with X-rays and were measured with an optical profiler. Their total effective areas are greater than about 70 percent of the theoretical values both for 1.5- and 6.4-keV X-rays. The half-power diameters are less than about 2 min of arc at 1.5 keV. A design of the mirror array telescope for high energies which has a total effective area of about 1000 sq cm for 7-keV X-rays is presented.

Affiliated with

Also associated with

No associations

Rating

X-ray and optical profiler analysis of electroformed X-ray optics does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.

If you have personal experience with X-ray and optical profiler analysis of electroformed X-ray optics, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and X-ray and optical profiler analysis of electroformed X-ray optics will most certainly appreciate the feedback.

Rate now

Comments { 0 }

Profile ID: LFWR-SCP-O-848260