What limits the achievable areal densities of large aperture space telescopes?

Details What limits the achievable areal densities of large aperture space telescopes? What limits the achievable areal densities of large aperture space telescopes?

Aug 2005

adsabs.harvard.edu/cgi-bin/nph-data_query?bibcode=2005spie.5899...91p&link_type=abstract

UV/Optical/IR Space Telescopes: Innovative Technologies and Concepts II. Edited by MacEwen, Howard A. Proceedings of the SPI

Physics

Scientific paper

This paper examines requirements trades involving areal density for large space telescope mirrors. A segmented mirror architecture is used to define a quantitative example that leads to relevant insight about the trades. In this architecture, the mirror consists of segments of non-structural optical elements held in place by a structural truss that rests behind the segments. An analysis is presented of the driving design requirements for typical on-orbit loads and ground-test loads. It is shown that the driving on-orbit load would be the resonance of the lowest mode of the mirror by a reaction wheel static unbalance. The driving ground-test load would be dynamics due to ground-induced random vibration. Two general conclusions are derived from these results. First, the areal density that can be allocated to the segments depends on the depth allocated to the structure. More depth in the structure allows the allocation of more mass to the segments. This, however, leads to large structural depth that might be a significant development challenge. Second, the requirement for ground-test-ability results in an order of magnitude or more depth in the structure than is required by the on-orbit loads. This leads to the proposition that avoiding ground test as a driving requirement should be a fundamental technology on par with the provision of deployable depth. Both are important structural challenges for these future systems.

Affiliated with

Also associated with

No associations

Rating

What limits the achievable areal densities of large aperture space telescopes? does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.

If you have personal experience with What limits the achievable areal densities of large aperture space telescopes?, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and What limits the achievable areal densities of large aperture space telescopes? will most certainly appreciate the feedback.

Rate now

Comments { 0 }

Profile ID: LFWR-SCP-O-801113