Verification of the controllability of refractive index by subwavelength structure fabricated by photolithography: toward single-material mid- and far-infrared multilayer filters

Details Verification of the controllability of refractive index by subwavelength structure fabricated by photolithography: toward single-material mid- and far-infrared multilayer filters Verification of the controllability of refractive index by subwavelength structure fabricated by photolithography: toward single-material mid- and far-infrared multilayer filters

Jul 2010

adsabs.harvard.edu/cgi-bin/nph-data_query?bibcode=2010spie.7739e..64m&link_type=abstract

Modern Technologies in Space- and Ground-based Telescopes and Instrumentation. Edited by Atad-Ettedgui, Eli; Lemke, Dietrich.

Computer Science

Performance

Scientific paper

We are developing high performance mid-infrared (especially 30-40μm wavelength regions) multilayer interference filters with mechanical strength and robustness for thermal cycling toward cryogenic infrared astronomical missions. Multilayer interference filters enable us to design a wide variety of spectral response by controlling refractive index and thickness of each layer. However, in mid- and far-infrared (MIR/FIR) regions, there are a few optical materials so that we can only use limited refractive index values to design filters, which makes difficult to realize high performance filters. It is also difficult to deposit thick layers required for MIR/FIR multilayer filters. Furthermore, deposition of two materials, which have different coefficients of thermal expansion, makes filters fragile for thermal cycling. To clear these problems, we introduce sub-wavelength structures (SWS) for controlling the refractive index. Then, only one material is necessary for fabricating filters, which enables us to fabricate filters with mechanical strength and robustness for thermal cycling. According to the effective medium approximation (EMA) theory, the refractive index of randomly mixing materials in sub-wavelength scale is controllable by changing the ratio of mixing materials. However, it is not clear that EMA can be applied to such simple SWS, periodic cylindrical holes on a bulk material, which is easily fabricated by photolithography. In order to verify the controllability of refractive index by simple SWS, we have fabricated simple SWS on a silicon substrate and measured its transmittance. Comparing measured transmittance with theoretical transmittance calculated by EMA, we confirm that EMA can be applied to simple SWS fabricated by photolithography.

Affiliated with

Also associated with

No associations

Rating

Verification of the controllability of refractive index by subwavelength structure fabricated by photolithography: toward single-material mid- and far-infrared multilayer filters does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.

If you have personal experience with Verification of the controllability of refractive index by subwavelength structure fabricated by photolithography: toward single-material mid- and far-infrared multilayer filters, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Verification of the controllability of refractive index by subwavelength structure fabricated by photolithography: toward single-material mid- and far-infrared multilayer filters will most certainly appreciate the feedback.

Rate now

Comments { 0 }

Profile ID: LFWR-SCP-O-1384874