Computer Science – Hardware Architecture
Scientific paper
2007-10-25
Dans Design, Automation and Test in Europe | Designers'Forum - DATE'05, Munich : Allemagne (2005)
Computer Science
Hardware Architecture
Submitted on behalf of EDAA (http://www.edaa.com/)
Scientific paper
At 130 nm and 90 nm, power consumption (both dynamic and static) has become a barrier in the roadmap for SoC designs targeting battery powered, mobile applications. This paper presents the results of dynamic and static power reduction achieved implementing Tensilica's 32-bit Xtensa microprocessor core, using Virtual Silicon's Power Management IP. Independent voltage islands are created using Virtual Silicon's VIP PowerSaver standard cells by using voltage level shifting cells and voltage isolation cells to implement power islands. The VIP PowerSaver standard cells are characterized at 1.2V, 1.0V and 0.8V, to accommodate voltage scaling. Power islands can also be turned off completely. Designers can significantly lower both the dynamic power and the quiescent or leakage power of their SoC designs, with very little impact on speed or area using Virtual Silicon's VIP Gate Bias standard cells.
No associations
LandOfFree
Using Mobilize Power Management IP for Dynamic & Static Power Reduction in SoC at 130 nm does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.
If you have personal experience with Using Mobilize Power Management IP for Dynamic & Static Power Reduction in SoC at 130 nm, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Using Mobilize Power Management IP for Dynamic & Static Power Reduction in SoC at 130 nm will most certainly appreciate the feedback.
Profile ID: LFWR-SCP-O-432942