Physics – Optics
Scientific paper
Oct 2004
adsabs.harvard.edu/cgi-bin/nph-data_query?bibcode=2004spie.5488..283h&link_type=abstract
UV and Gamma-Ray Space Telescope Systems. Edited by Hasinger, Günther; Turner, Martin J. L. Proceedings of the SPIE, Volume 548
Physics
Optics
Scientific paper
The Reflection Grating Spectrometer (RGS) on Constellation-X is designed to supply astronomers with high spectral resolution in the soft x-ray band from 0.25 to 2 keV. High resolution, large collecting area and low mass at grazing incidence require very flat and thin grating substrates, or thin-foil optics. Thin foils typically have a diameter-to-thickness ratio of 200 or higher and as a result very low stiffness. This poses a number of technological challenges in the areas of shaping, handling, positioning, and mounting of such optics. The most minute forces (gravity sag, friction, thermal mismatch with optic mount, etc.) can lead to intolerable deformations and limit figure metrology repeatability. We present results of our efforts in the manipulation and metrology of suitable grating substrates, utilizing a novel low-stress foil holder with friction-reducing flexures. A large number of reflection gratings is needed to achieve the required collecting area. We have employed nanoimprint lithography (NIL) - which uses imprint films as thin as 100 nm or less - for the high-fidelity and low-stress replication from 100 mm diameter saw-tooth grating masters.
Akilian Mireille
Chang Chih-Hao
Forest Craig R.
Heilmann Ralf K.
Joo Chulmin
No associations
LandOfFree
Thin-foil reflection gratings for Constellation-X does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.
If you have personal experience with Thin-foil reflection gratings for Constellation-X, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Thin-foil reflection gratings for Constellation-X will most certainly appreciate the feedback.
Profile ID: LFWR-SCP-O-1807899