The NSNS High Energy Beam Transport Line

Details The NSNS High Energy Beam Transport Line The NSNS High Energy Beam Transport Line

1997-09-09

arxiv.org/abs/physics/9709013v1

Conf.Proc.C970512:162-164,1997

Physics

Accelerator Physics

3 pages, transfer line design

Scientific paper

In the National Spallation Neutron Source (NSNS) design, a 180 meter long transport line connects the 1 GeV linac to an accumulator ring. The linac beam has a current of 28 mA, pulse length of 1 ms, and 60 Hz rep rate. The high energy transport line consists of sixteen 60 degrees FODO cells, and accommodates a 90 degrees achromatic bend, an energy compressor, collimators, part of injection system, and enough diagnostic devices to measure the beam quality before injection. To reduce the uncontrolled beam losses, this line has nine beam halo scrapers and very tight tolerances on both transverse and longitudinal beam dynamics under space charge conditions. The design of this line is presented.

Affiliated with

Also associated with

No associations

Rating

The NSNS High Energy Beam Transport Line does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.

If you have personal experience with The NSNS High Energy Beam Transport Line, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and The NSNS High Energy Beam Transport Line will most certainly appreciate the feedback.

Rate now

Comments { 0 }

Profile ID: LFWR-SCP-O-262720