The Mechanical Design for the Darht-II Downstream Beam Transport Line

Details The Mechanical Design for the Darht-II Downstream Beam Transport Line The Mechanical Design for the Darht-II Downstream Beam Transport Line

2000-08-14

arxiv.org/abs/physics/0008059v1

eConf C000821 (2000) TUB16

Physics

Accelerator Physics

3 pages, 4 figures, LINAC2000, TUB16

Scientific paper

This paper describes the mechanical design of the downstream beam transport line for the second axis of the Dual Axis Radiographic Hydrodynamic Test (DARHT II) Facility. The DARHT-II project is a collaboration between LANL, LBNL and LLNL. DARHT II is a 20-MeV, 2000-Amperes, 2-msec linear induction accelerator designed to generate short bursts of x-rays for the purpose of radiographing dense objects. The down-stream beam transport line is approximately 20-meter long region extending from the end of the accelerator to the bremsstrahlung target. Within this proposed transport line there are 15 conventional solenoid, quadrupole and dipole magnets; as well as several speciality magnets, which transport and focus the beam to the target and to the beam dumps. There are two high power beam dumps, which are designed to absorb 80-kJ per pulse during accelerator start-up and operation. Aspects of the mechanical design of these elements are presented.

Affiliated with

Also associated with

No associations

Rating

The Mechanical Design for the Darht-II Downstream Beam Transport Line does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.

If you have personal experience with The Mechanical Design for the Darht-II Downstream Beam Transport Line, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and The Mechanical Design for the Darht-II Downstream Beam Transport Line will most certainly appreciate the feedback.

Rate now

Comments { 0 }

Profile ID: LFWR-SCP-O-601260