The alpine Swiss-French airborne gravity survey

Details The alpine Swiss-French airborne gravity survey The alpine Swiss-French airborne gravity survey

Jan 2003

adsabs.harvard.edu/cgi-bin/nph-data_query?bibcode=2003geoji.152....8v&link_type=abstract

Geophysical Journal International, Volume 152, Issue 1, pp. 8-19.

Astronomy and Astrophysics

Astronomy

5

Airborne Gravimetry, Equalization, Filtering, Upward Continuation

Scientific paper

In February 1998, a regional-scale, airborne gravity survey was carried out over the French Occidental Alps within the framework of the GéoFrance 3-D research program.The survey consisted of 18 NS and 16 EW oriented lines with a spacing of 10 and 20 km respectively, covering the whole of the Western French Alps (total area: 50 000 km2; total distance of lines flown: 10 000 km). The equipment was mounted in a medium-size aircraft (DeHavilland Twin Otter) flowing at a constant altitude of 5100 m a.s.l, and at a mean ground speed of about 280 km h-1. Gravity was measured using a LaCoste & Romberg relative, air/sea gravimeter (type SA) mounted on a laser gyro stabilized platform. Data from 5 GPS antennae located on fuselage and wings and 7 ground-based GPS reference stations were used to determine position and aircraft induced accelerations.The gravimeter passband was derived by comparing the vertical accelerations provided by the gravimeter with those estimated from the GPS positions. This comparison showed that the gravimeter is not sensitive to very short wavelength aircraft accelerations, and therefore a simplified formulation for computing airborne gravity measurements was developed. The intermediate and short wavelength, non-gravitational accelerations were eliminated by means of digital, exponential low-pass filters (cut-off wavelength: 16 km). An important issue in airborne gravimetry is the reliability of the airborne gravity surveys when compared to ground surveys. In our studied area, the differences between the airborne-acquired Bouguer anomaly and the ground upward-continued Bouguer anomaly of the Alps shows a good agreement: the rms of these differences is equal to 7.68 mGal for a spatial resolution of 8 km. However, in some areas with rugged topography, the amplitudes of those differences have a striking correlation with the topography. We then argue that the choice of an appropriate density (reduction by a factor of 10 per cent) for computing the ground topographic corrections over the highest mountains, results in significantly reducing the differences between airborne and ground upward-continued Bouguer anomalies, which shows that some of the misfit stems from errors in the ground data.

Affiliated with

Also associated with

No associations

Rating

The alpine Swiss-French airborne gravity survey does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.

If you have personal experience with The alpine Swiss-French airborne gravity survey, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and The alpine Swiss-French airborne gravity survey will most certainly appreciate the feedback.

Rate now

Comments { 0 }

Profile ID: LFWR-SCP-O-1527070