Stable flexure mounting of a MEMS deformable mirror for the GPI Planet Imager

Details Stable flexure mounting of a MEMS deformable mirror for the GPI Planet Imager Stable flexure mounting of a MEMS deformable mirror for the GPI Planet Imager

Jul 2008

adsabs.harvard.edu/cgi-bin/nph-data_query?bibcode=2008spie.7018e..44h&link_type=abstract

Advanced Optical and Mechanical Technologies in Telescopes and Instrumentation. Edited by Atad-Ettedgui, Eli; Lemke, Dietrich.

Physics

Optics

Scientific paper

Small deformable mirrors (DMs) produced using microelectromechanical systems (MEMS) techniques have been used in thermally stable, bench-top laboratory environments. With advances in MEMS DM technology, a variety of field applications are becoming more common, such as the Gemini Planet Imager's (GPI) adaptive optics system. Instruments at the Gemini Observatory operate in conditions where fluctuating ambient temperature, varying gravity orientations and humidity and dust can have a significant affect on DM performance. As such, it is crucial that the mechanical design of the MEMS DM be tailored to the environment. GPI's approach has been to mount the MEMS DM using high performance optical mounting techniques rather than a typical laboratory set-up. This paper discusses the design of the opto-mechanical mounting scheme for a 4096 actuator MEMS DM, developed by Boston Micromachines Corporation for use in the GPI adaptive optics system. Flexures have been incorporated into the DM mount to reduce deformations on the optical surface due to thermal fluctuations. These flexures have also been sized to maintain alignment under varying gravity vector orientations. Finally, a system for environmentally sealing the mirror has been designed to prevent degradation due to humidity effects. A plan for testing the mechanical mount to ensure that it meets GPI's performance and environmental requirements is also presented.

Affiliated with

Also associated with

No associations

Rating

Stable flexure mounting of a MEMS deformable mirror for the GPI Planet Imager does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.

If you have personal experience with Stable flexure mounting of a MEMS deformable mirror for the GPI Planet Imager, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Stable flexure mounting of a MEMS deformable mirror for the GPI Planet Imager will most certainly appreciate the feedback.

Rate now

Comments { 0 }

Profile ID: LFWR-SCP-O-794428