Silver halide single mode fibers for broadband middle infrared stellar interferometry

Details Silver halide single mode fibers for broadband middle infrared stellar interferometry Silver halide single mode fibers for broadband middle infrared stellar interferometry

Jun 2009

adsabs.harvard.edu/cgi-bin/nph-data_query?bibcode=2009apphl..94z1105l&link_type=abstract

Applied Physics Letters, Volume 94, Issue 26, id. 261105 (3 pages) (2009).

Physics

1

Interferometry

Scientific paper

We report the demonstration of silver halide single mode fibers at λ=7.5 μm. The fiber's modal behavior was tested at λ=10.6 and λ=7.5 μm, using near field measurements. Single mode operation was observed for both wavelengths with propagation losses of ~16 and ~40 dB/m at λ=10.6 and λ=7.5 μm, respectively. A rejection ratio of ~30 dB was achieved at λ=7.5 μm for a 30 cm long fiber segment. These fibers would be particularly useful for modal filtering in the 6-20 μm band. Modal filters are essential technology elements in nulling stellar interferometry.

Affiliated with

Also associated with

No associations

Rating

Silver halide single mode fibers for broadband middle infrared stellar interferometry does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.

If you have personal experience with Silver halide single mode fibers for broadband middle infrared stellar interferometry, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Silver halide single mode fibers for broadband middle infrared stellar interferometry will most certainly appreciate the feedback.

Rate now

Comments { 0 }

Profile ID: LFWR-SCP-O-776779