Radiation effects in two InGaAs focal plane arrays

Physics

Scientific paper

Rate now

  [ 0.00 ] – not rated yet Voters 0   Comments 0

Details

Scientific paper

As part of the early development for NASA's Mars Laser Communication Demonstration (now canceled), we exposed two InGaAs focal plane arrays (FPAs) to 22 krad(Si) dose at a rate of 4.6 rad(Si)/s using a 60Co gamma-ray source. Both the SU320MS from Sensors Unlimited and the ISC9809 from FLIR Systems, Inc. operated throughout the test. The FPA electronics were shielded from radiation; only the photosensitive InGaAs and its readout integrated circuit (ROIC) were exposed. Background levels on both FPAs increased during the test. The SU320MS saturated and failed to respond to infrared light after the test. The ISC9809's background increased but did not saturate. Phenomena exhibited during the test included both isolated single-pixel hits and increased mean over the full FPA. Tests of the ISC9809 after irradiation indicate no change in gain but an increase in mean dark current. In addition, 91% of the ISC9809 pixels also had increased temporal noise. As a result of these tests, the ISC9809 was chosen for flight, but shielding was added to reduce the level seen by the FPA to an estimated 6 krad(Si) for a 10-year lifetime in Mars orbit.

No associations

LandOfFree

Say what you really think

Search LandOfFree.com for scientists and scientific papers. Rate them and share your experience with other people.

Rating

Radiation effects in two InGaAs focal plane arrays does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.

If you have personal experience with Radiation effects in two InGaAs focal plane arrays, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Radiation effects in two InGaAs focal plane arrays will most certainly appreciate the feedback.

Rate now

     

Profile ID: LFWR-SCP-O-1295090

  Search
All data on this website is collected from public sources. Our data reflects the most accurate information available at the time of publication.