Radially Polarized Conical Beam from an Embedded Etched Fiber

Details Radially Polarized Conical Beam from an Embedded Etched Fiber Radially Polarized Conical Beam from an Embedded Etched Fiber

2009-08-31

arxiv.org/abs/0908.4474v1

Optics Letters 34, 12 (2009) 1780-1782

Physics

Optics

Scientific paper

10.1364/OL.34.001780

We propose a method for producing a conical beam based on the lateral refraction of the TM01 mode from a two-mode fiber after chemical etching of the cladding, and for controlling its radial polarization. The whole power of the guided mode is transferred to the refracted beam with low diffraction. Polarization control by a series of azimuthal detectors and a stress controller affords the transmission of a stabilized radial polarization through an optical fiber. A solid component usable for many applications has been obtained.

Affiliated with

Also associated with

No associations

Rating

Radially Polarized Conical Beam from an Embedded Etched Fiber does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.

If you have personal experience with Radially Polarized Conical Beam from an Embedded Etched Fiber, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Radially Polarized Conical Beam from an Embedded Etched Fiber will most certainly appreciate the feedback.

Rate now

Comments { 0 }

Profile ID: LFWR-SCP-O-220335