Present status of development of damping ring extraction kicker system for CLIC

Details Present status of development of damping ring extraction kicker system for CLIC Present status of development of damping ring extraction kicker system for CLIC

2012-02-29

arxiv.org/abs/1202.6527v1

Physics

Accelerator Physics

Proceedings of LCWS'11, International Workshop on Future Linear Colliders, Granada, Spain 26-30 Sept 2011

Scientific paper

The CLIC damping rings will produce ultra-low emittance beam, with high bunch charge, necessary for the luminosity performance of the collider. To limit the beam emittance blow-up due to oscillations, the pulse power modulators for the damping ring kickers must provide extremely flat, high-voltage pulses: specifications call for a 160 ns duration and a flattop of 12.5 kV, 250 A, with a combined ripple and droop of not more than \pm0.02 %. The stripline design is also extremely challenging: the field for the damping ring kicker system must be homogenous to within \pm0.01 % over a 1 mm radius, and low beam coupling impedance is required. The solid-state modulator, the inductive adder, is a very promising approach to meeting the demanding specifications for the field pulse ripple and droop. This paper describes the initial design of the inductive adder and the striplines of the kicker system.

Affiliated with

Also associated with

No associations

Rating

Present status of development of damping ring extraction kicker system for CLIC does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.

If you have personal experience with Present status of development of damping ring extraction kicker system for CLIC, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Present status of development of damping ring extraction kicker system for CLIC will most certainly appreciate the feedback.

Rate now

Comments { 0 }

Profile ID: LFWR-SCP-O-524144