Opto-mechanical design of the 3,6 m Optical Telescope for ARIES

Details Opto-mechanical design of the 3,6 m Optical Telescope for ARIES Opto-mechanical design of the 3,6 m Optical Telescope for ARIES

Aug 2008

adsabs.harvard.edu/cgi-bin/nph-data_query?bibcode=2008spie.7012e...8f&link_type=abstract

Ground-based and Airborne Telescopes II. Edited by Stepp, Larry M.; Gilmozzi, Roberto. Proceedings of the SPIE, Volume 7012, p

Physics

Scientific paper

AMOS SA has been awarded of the contract for the design, manufacturing, assembly, tests and on site installation (Nainital, Devasthal site at 2540 mm altitude) of the 3,6 m Optical Telescope for ARIES (Aryabhatta Research Institute of Observational Sciences), Nainital (India). This paper describes the opto-mechanical design of this telescope and presents the solutions adopted by AMOS to meet the specific requirements. The telescope has a Ritchey-Chrétien optical configuration with a Cassegrain focus equipped with one axial port and two side ports. The primary mirror is a meniscus active mirror.

Affiliated with

Also associated with

No associations

Rating

Opto-mechanical design of the 3,6 m Optical Telescope for ARIES does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.

If you have personal experience with Opto-mechanical design of the 3,6 m Optical Telescope for ARIES, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Opto-mechanical design of the 3,6 m Optical Telescope for ARIES will most certainly appreciate the feedback.

Rate now

Comments { 0 }

Profile ID: LFWR-SCP-O-1810403