Physics
Scientific paper
Sep 2004
adsabs.harvard.edu/cgi-bin/nph-data_query?bibcode=2004spie.5494...71w&link_type=abstract
Optical Fabrication, Metrology, and Material Advancements for Telescopes, Edited by E. Atad-Ettedgui and P. Dierickx. Procee
Physics
1
Scientific paper
The Precessions process uses an inflated membrane-tool that delivers near-Gaussian polishing spots. The tool-motion over the part can be constructed to preserve an aspheric form whilst removing damage from preceding processes, or control the form through a tool-path prescribed by numerical optimization. The process has previously been validated on surfaces up to 200mm diameter and used extensively in industrial environments. In this paper we report the first trials on a substantially larger part - a 500mm diameter f/1 ellipsoidal mirror - as part of the UK"s technology-development for Extremely Large Telescopes. We draw attention to subtle problems that have arisen along the way. We also report on developing the process for free-form surfaces, in contrast to the axially-symmetric parts worked hitherto. The paper concludes with an assessment of the lessons learnt from the experiments, as they may impact on realization in a practical ELT segment fabrication facility.
Beaucamp Anthony T. H.
Brooks David
Cassie Matthew D.
Doubrovski V.
Dunn Corey
No associations
LandOfFree
New results from the Precessions polishing process scaled to larger sizes does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.
If you have personal experience with New results from the Precessions polishing process scaled to larger sizes, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and New results from the Precessions polishing process scaled to larger sizes will most certainly appreciate the feedback.
Profile ID: LFWR-SCP-O-1822090