Physics – Accelerator Physics
Scientific paper
2008-11-18
Conf.Proc.C0806233:thpc117,2008
Physics
Accelerator Physics
Presented at 11th European Particle Accelerator Conference (EPAC 08)
Scientific paper
The primary purpose of the Fermilab Recycler Ring Transverse Digital Damper System is to prevent instabilities due to high phase space densities of the cooled antiproton beam. The system was designed to facilitate Beam Transfer Function measurements using a signal analyzer connected to auxiliary system ports for timing and diagnostic purposes. The Digital Damper System has the capability for both open and closed loop measurements. The Beam Transfer Function provides direct measurement of the machine impedance, and beam and lattice parameters such as betatron tune and chromaticity. An overview of the technique is presented along with analysis and results from open and closed loop measurements in the Fermilab Recycler Ring.
Crisp J. L.
Eddy Nathan
Hu Mingshang
No associations
LandOfFree
Measurements and Analysis of Beam Transfer Functions in the Fermilab Recycler Ring Using the Transverse Digital Damper System does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.
If you have personal experience with Measurements and Analysis of Beam Transfer Functions in the Fermilab Recycler Ring Using the Transverse Digital Damper System, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Measurements and Analysis of Beam Transfer Functions in the Fermilab Recycler Ring Using the Transverse Digital Damper System will most certainly appreciate the feedback.
Profile ID: LFWR-SCP-O-101639