Manufacture and testing of x-ray optical elements for the TEREK-C and RES-C instruments on the CORONAS-I mission

Details Manufacture and testing of x-ray optical elements for the TEREK-C and RES-C instruments on the CORONAS-I mission Manufacture and testing of x-ray optical elements for the TEREK-C and RES-C instruments on the CORONAS-I mission

Jun 1998

adsabs.harvard.edu/cgi-bin/nph-data_query?bibcode=1998spie.3406...20i&link_type=abstract

Proc. SPIE Vol. 3406, p. 20-34, Current Russian Research in Optics and Photonics: New Methods and Instruments for Space- and Ear

Physics

Optics

2

Scientific paper

The paper describes the main characteristics of the X-ray optical elements (multilayer spherical and aspherical mirrors and diffraction gratings for the 13-30 nm XUV spectral region, Bragg crystal spherical mirrors for the 0.18 and 0.84 m soft X-ray spectral regions) manufactured for the TEREK-C solar XUV telescope array and the RES-C solar spectroheliograph. The TEREK-C and RES-C instruments were placed aboard the CORONAS-I satellite which was launched on March 2, 1994. The testing procedures and results of laboratory tests in X-ray spectral range are also presented.

Affiliated with

Also associated with

No associations

Rating

Manufacture and testing of x-ray optical elements for the TEREK-C and RES-C instruments on the CORONAS-I mission does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.

If you have personal experience with Manufacture and testing of x-ray optical elements for the TEREK-C and RES-C instruments on the CORONAS-I mission, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Manufacture and testing of x-ray optical elements for the TEREK-C and RES-C instruments on the CORONAS-I mission will most certainly appreciate the feedback.

Rate now

Comments { 0 }

Profile ID: LFWR-SCP-O-1448644