Making optical atomic clocks more stable with $10^{-16}$ level laser stabilization

Details Making optical atomic clocks more stable with $10^{-16}$ level laser stabilization Making optical atomic clocks more stable with $10^{-16}$ level laser stabilization

2011-01-07

arxiv.org/abs/1101.1351v1

Physics

Atomic Physics

Scientific paper

The superb precision of an atomic clock is derived from its stability. Atomic clocks based on optical (rather than microwave) frequencies are attractive because of their potential for high stability, which scales with operational frequency. Nevertheless, optical clocks have not yet realized this vast potential, due in large part to limitations of the laser used to excite the atomic resonance. To address this problem, we demonstrate a cavity-stabilized laser system with a reduced thermal noise floor, exhibiting a fractional frequency instability of $2 \times 10^{-16}$. We use this laser as a stable optical source in a Yb optical lattice clock to resolve an ultranarrow 1 Hz transition linewidth. With the stable laser source and the signal to noise ratio (S/N) afforded by the Yb optical clock, we dramatically reduce key stability limitations of the clock, and make measurements consistent with a clock instability of $5 \times 10^{-16} / \sqrt{\tau}$.

Affiliated with

Also associated with

No associations

Rating

Making optical atomic clocks more stable with $10^{-16}$ level laser stabilization does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.

If you have personal experience with Making optical atomic clocks more stable with $10^{-16}$ level laser stabilization, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Making optical atomic clocks more stable with $10^{-16}$ level laser stabilization will most certainly appreciate the feedback.

Rate now

Comments { 0 }

Profile ID: LFWR-SCP-O-483370