Computer Science – Robotics
Scientific paper
Nov 1991
adsabs.harvard.edu/cgi-bin/nph-data_query?bibcode=1991sca..book...42a&link_type=abstract
In its Space Construction Activities p 42-45 (SEE N93-29108 11-18)
Computer Science
Robotics
Construction, Design Analysis, Lunar Roving Vehicles, Positioning, Robot Dynamics, Telerobotics, Controllers, Coordination, Local Area Networks, Modularity, Redundancy
Scientific paper
Telerobotic rovers equipped with adequate actuators and sensors are clearly necessary for extraterrestrial construction. They will be employed as substitutes for humans, to perform jobs like surveying, sensing, signaling, manipulating, and the handling of small materials. Important design criteria for these rovers include versatility and robustness. They must be easily programmed and reprogrammed to perform a wide variety of different functions, and they must be robust so that construction work will not be jeopardized by parts failures. The key qualities and functions necessary for these rovers to achieve the required versatility and robustness are modularity, redundancy, and coordination. Three robotic rovers are being built by CSC as a test bed to implement the concepts of modularity and coordination. The specific goal of the design and construction of these robots is to demonstrate the software modularity and multirobot control algorithms required for the physical manipulation of constructible elements. Each rover consists of a transporter platform, bus manager, simple manipulator, and positioning receivers. These robots will be controlled from a central control console via a radio-frequency local area network (LAN). To date, one prototype transporter platform frame was built with batteries, motors, a prototype single-motor controller, and two prototype internal LAN boards. Software modules were developed in C language for monitor functions, i/o, and parallel port usage in each computer board. Also completed are the fabrication of half of the required number of computer boards, the procurement of 19.2 Kbaud RF modems for inter-robot communications, and the simulation of processing requirements for positioning receivers. In addition to the robotic platform, the fabrication of a local positioning system based on infrared signals is nearly completed. This positioning system will make the rovers into a moving reference system capable of performing site surveys. In addition, a four degree mechanical manipulator especially suited for coordinated teleoperation was conceptually designed and is currently being analyzed. This manipulator will be integrated into the rovers as their end effector. Twenty internal LAN cards fabricated by a commercial firm are being used, a prototype manipulator and a range finder for a positioning system were built, a prototype two-motor controller was designed, and one of the robots is performing its first telerobotic motion. In addition, the robots' internal LAN's were coordinated and tested, hardware design upgrades based on fabrication and fit experience were completed, and the positioning system is running.
Avery James
Su Renjeng
No associations
LandOfFree
Lunar rovers and local positioning system does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.
If you have personal experience with Lunar rovers and local positioning system, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Lunar rovers and local positioning system will most certainly appreciate the feedback.
Profile ID: LFWR-SCP-O-1719011