Lightweight active controlled primary mirror technology demonstrator

Details Lightweight active controlled primary mirror technology demonstrator Lightweight active controlled primary mirror technology demonstrator

Nov 2007

adsabs.harvard.edu/cgi-bin/nph-data_query?bibcode=2007spie.6750e..26m&link_type=abstract

Lidar Technologies, Techniques, and Measurements for Atmospheric Remote Sensing III. Edited by Singh, Upendra N.; Pappalardo, G

Physics

Optics

Scientific paper

This paper describes the design, manufacturing and test of a ground demonstrator of an innovative technology able to realize lightweight active controlled space-borne telescope mirror. This analysis is particularly devoted to applications for a large aperture space telescope for advanced LIDAR, but it can be used for any lightweight mirror. For a space-borne telescope the mirror weight is a fundamental parameter to be minimized (less than 15 Kg/m2), while maximizing the optical performances (optical quality better than λ/3). In order to guarantee these results, the best selected solution is a thin glass primary mirror coupled to a stiff CFRP (Carbon Fiber Reinforced Plastic) panel with a surface active control system. A preliminary design of this lightweight structure highlighted the critical areas that were deeply analyzed by the ground demonstrator: the 1 mm thick mirror survivability on launch and the actuator functional performances with low power consumption. To preserve the mirror glass the Electrostatic Locking technique was developed and is here described. The active optics technique, already widely used for ground based telescopes, consists of a metrology system (wave front sensor, WFS), a control algorithm and a system of actuators to slightly deform the primary mirror and/or displace the secondary, in a closed-loop control system that applies the computed corrections to the mirror's optical errors via actuators. These actuators types are properly designed and tested in order to guarantee satisfactory performances in terms of stroke, force and power consumption. The realized and tested ground demonstrator is a square CFRP structure with a flat mirror on the upper face and an active actuator beneath it. The test campaign demonstrated the technology feasibility and robustness, supporting the next step toward the large and flat surface with several actuators.

Affiliated with

Also associated with

No associations

Rating

Lightweight active controlled primary mirror technology demonstrator does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.

If you have personal experience with Lightweight active controlled primary mirror technology demonstrator, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Lightweight active controlled primary mirror technology demonstrator will most certainly appreciate the feedback.

Rate now

Comments { 0 }

Profile ID: LFWR-SCP-O-1547736