Large light X-ray optics: basic ideas and concepts

Details Large light X-ray optics: basic ideas and concepts Large light X-ray optics: basic ideas and concepts

Jan 2004

adsabs.harvard.edu/cgi-bin/nph-data_query?bibcode=2004adspr..34.2637c&link_type=abstract

Advances in Space Research, Volume 34, Issue 12, p. 2637-2645.

Physics

Optics

X-Ray Optics, X-Ray Astronomy, X-Ray Telescopes

Scientific paper

One of the main guidelines for future X-ray astronomy projects like, e.g., XEUS (ESA) and Generation-X (NASA) is to utilize grazing-incidence focusing optics with extremely large telescopes (several tens of m2 at 1 keV), with a dramatic increase in collecting area of about two order of magnitude compared to the current X-ray telescopes. In order to avoid the problem of the source's confusion limit at low fluxes, the angular resolution required for these optics should be superb (a few arcsec at most). The enormous mirror dimensions together with the high imaging performances give rise to a number of manufacturing problems. It is basically impossible to realize so large mirrors from closed Wolter I shells which benefit from high mechanical stiffness. Instead the mirrors need to be formed as rectangular segments and a series of them will be assembled in a petal. Taking into account the realistic load capabilities of space launchers, to be able to put in orbit so large mirror modules the mass/geometric-area ratio of the optics should be very small. Finally, with a so large optics mass it would be very difficult to provide the electric power for an optics thermal active control, able to maintain the mirrors at the usual temperature of 20 °C. Therefore, very likely, the optics will instead operate in extreme thermal conditions, with the mirror temperature oscillating between -30 and -40 °C, that tends to exclude the epoxy replication approach (the mismatch between the CTE of the substrate and that of the resin would cause prohibitively large deformations of the mirror surface profiles). From these considerations light weight materials with high thermal-mechanical properties such as glass or ceramics become attractive to realize the mirrors of future Xray telescopes. In this paper, we will discuss a segments manufacturing method based on BorofloatTM glass. A series of finite element analysis concerning different aspects of the production, testing and integration of the optics are also presented as well.

Affiliated with

Also associated with

No associations

Rating

Large light X-ray optics: basic ideas and concepts does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.

If you have personal experience with Large light X-ray optics: basic ideas and concepts, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Large light X-ray optics: basic ideas and concepts will most certainly appreciate the feedback.

Rate now

Comments { 0 }

Profile ID: LFWR-SCP-O-1839281