Physics – Optics
Scientific paper
Jan 1993
adsabs.harvard.edu/cgi-bin/nph-data_query?bibcode=1993spie.1742..585r&link_type=abstract
Proc. SPIE Vol. 1742, p. 585-592, Multilayer and Grazing Incidence X-Ray/EUV Optics for Astronomy and Projection Lithography, Ri
Physics
Optics
Scientific paper
SXPL (soft X-ray projection lithography) is one of the most promising applications of X-ray reflecting optics using multilayer mirrors. Within our collaboration, such multilayer mirrors were fabricated, characterized, laterally structured and then used as reflection masks in a projecting lithography procedure. Mo/Si-multilayer mirrors were produced by electron beam evaporation in UHV under thermal treatment with an in-situ X-ray controlled thickness in the region of 2d equals 14 nm. The reflectivities measured at normal incidence reached up to 54%. Various surface analysis techniques have been applied in order to characterize and optimize the X-ray mirrors. The multilayers were patterned by reactive ion etching (RIE) with CF(subscript 4), using a photoresist as the etch mask, thus producing X-ray reflection masks. The masks were tested in the synchrotron radiation laboratory of the electron accelerator ELSA at the Physikalisches Institut of Bonn University. A double crystal X-ray monochromator was modified so as to allow about 0.5 cm(superscript 2) of the reflection mask to be illuminated by white synchrotron radiation. The reflected patterns were projected (with an energy of 100 eV) onto the resist (Hoechst AZ PF 514), which was mounted at an average distance of about 7 mm. In the first test-experiments, structure sizes down to 8 micrometers were nicely reproduced over the whole of the exposed area. Smaller structures were distorted by Fresnel-diffraction. The theoretically calculated diffraction images agree very well with the observed images.
Heinzmann Ulrich
Hormes F. J.
Kadel Klaus
Kleineberg Ulf
Kloidt Andreas
No associations
LandOfFree
Large-area soft x-ray projection lithography using multilayer mirrors structured by RIE does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.
If you have personal experience with Large-area soft x-ray projection lithography using multilayer mirrors structured by RIE, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Large-area soft x-ray projection lithography using multilayer mirrors structured by RIE will most certainly appreciate the feedback.
Profile ID: LFWR-SCP-O-1265847