In-situ observation of the hole formation during deep drilling with ultrashort laser pulses

Physics – Optics

Scientific paper

Rate now

  [ 0.00 ] – not rated yet Voters 0   Comments 0

Details

Scientific paper

We report on the in-situ observation of the laser drilling process using ultrashort laser pulses. Our technique is based on transmission imaging of a silicon sample at 1060 nm. For drilling, we used a laser system that provides pulses with a duration of 8 ps at 1030 nm. This wavelength is below the band edge and silicon shows linear absorption. The beam is focused on the sample surface perpendicular to the transillumination. Therefore, the temporal evolution of the longitudinal silhouette of the hole can be visualized during the drilling progress. Our observations show a change of the drilling dynamics in the depth of the material. Effects like the decrease in ablation rate, the formation of bulges, deviations in drilling direction and finally a branching of the hole end occur due to the influence of the previously excavated capillary. That causes a perturbation of the beam by internal reflections and the interaction with ablation products as well as their additional abrasive effect. The dependence of hole depth and shape on the process parameters, especially fluence and pulse energy, is studied. The maximum achievable hole depth in deep drilling is chiefly determined by the pulse energy but largely independent of fluence.

No associations

LandOfFree

Say what you really think

Search LandOfFree.com for scientists and scientific papers. Rate them and share your experience with other people.

Rating

In-situ observation of the hole formation during deep drilling with ultrashort laser pulses does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.

If you have personal experience with In-situ observation of the hole formation during deep drilling with ultrashort laser pulses, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and In-situ observation of the hole formation during deep drilling with ultrashort laser pulses will most certainly appreciate the feedback.

Rate now

     

Profile ID: LFWR-SCP-O-1533890

  Search
All data on this website is collected from public sources. Our data reflects the most accurate information available at the time of publication.