High-power Circulator Test Results at 350 MHz and 700 MHz

Details High-power Circulator Test Results at 350 MHz and 700 MHz High-power Circulator Test Results at 350 MHz and 700 MHz

2000-08-16

arxiv.org/abs/physics/0008089v1

eConf C000821 (2000) THE06

Physics

Accelerator Physics

LINAC 2000 Conference Paper # THE06

Scientific paper

The high-power RF systems for the Accelerator Production of Tritium (APT) program require high-power circulators at 350 MHz and 700 MHz to protect 1 MW Continuous Wave (CW) klystrons from reflected power. The 350 MHz circulator is based on the CERN, ESRF, and APS designs and has performed very well. The 700 MHz circulator is a new design. Prototype 700 MHz circulators have been high-power tested at Los Alamos National Laboratory (LANL). The first of these circulators has satisfied performance requirements. The circulator requirements, results from the testing, and lessons learned from this development are presented and discussed.

Affiliated with

Also associated with

No associations

Rating

High-power Circulator Test Results at 350 MHz and 700 MHz does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.

If you have personal experience with High-power Circulator Test Results at 350 MHz and 700 MHz, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and High-power Circulator Test Results at 350 MHz and 700 MHz will most certainly appreciate the feedback.

Rate now

Comments { 0 }

Profile ID: LFWR-SCP-O-674258