FPGA based control system for space instrumentation

Details FPGA based control system for space instrumentation FPGA based control system for space instrumentation

Aug 2008

adsabs.harvard.edu/cgi-bin/nph-data_query?bibcode=2008spie.7019e..50d&link_type=abstract

Advanced Software and Control for Astronomy II. Edited by Bridger, Alan; Radziwill, Nicole M. Proceedings of the SPIE, Volume 70

Astronomy and Astrophysics

Astronomy

Scientific paper

The prototype for a general purpose FPGA based control system for space instrumentation is presented, with particular attention to the instrument control application software. The system HW is based on the LEON3FT processor, which gives the flexibility to configure the chip with only the necessary HW functionalities, from simple logic up to small dedicated processors. The instrument control SW is developed in ANSI C and for time critical (<10μs) commanding sequences implements an internal instructions sequencer, triggered via an interrupt service routine based on a HW high priority interrupt.

Affiliated with

Also associated with

No associations

Rating

FPGA based control system for space instrumentation does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.

If you have personal experience with FPGA based control system for space instrumentation, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and FPGA based control system for space instrumentation will most certainly appreciate the feedback.

Rate now

Comments { 0 }

Profile ID: LFWR-SCP-O-1060956