FOS CYCLE-1 Focus, X-Pitch and Y-Pitch

Details FOS CYCLE-1 Focus, X-Pitch and Y-Pitch FOS CYCLE-1 Focus, X-Pitch and Y-Pitch

Jul 1991

adsabs.harvard.edu/cgi-bin/nph-data_query?bibcode=1991hst..prop.3923f&link_type=abstract

HST Proposal ID #3923

Physics

Hst Proposal Id #3923

Scientific paper

After warm-up to the nominal high voltage, the trim current is set to zero, and the HV is set to a lower value. Spectra are then obtained with the 0.1-PAIR aperture, G190H, and the Pt-Ne lamp. The high-voltage is then varied in 200 volt increments +/- 600 volts from the nominal setting with spectra taken at each setting. This will allow for optimal focus determination. Once a optimal HV setting is determined and updates made to the PDB, a series of spectra at three different X-Bases will be made to determine the corresponding X-Pitch. Additionally, measurements with the TALEDs through the 0.1-Pair aperture will be used to determine Y-Pitch. This program will result in an instruction flow change to the detector high voltage setting, the x-pitch value, the y-pitch value.

Affiliated with

Also associated with

No associations

Rating

FOS CYCLE-1 Focus, X-Pitch and Y-Pitch does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.

If you have personal experience with FOS CYCLE-1 Focus, X-Pitch and Y-Pitch, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and FOS CYCLE-1 Focus, X-Pitch and Y-Pitch will most certainly appreciate the feedback.

Rate now

Comments { 0 }

Profile ID: LFWR-SCP-O-862661