First test on an integrated optics potential for optical path stabilization in a stellar interferometer

Details First test on an integrated optics potential for optical path stabilization in a stellar interferometer First test on an integrated optics potential for optical path stabilization in a stellar interferometer

Nov 2005

adsabs.harvard.edu/cgi-bin/nph-data_query?bibcode=2005jopta...7..660o&link_type=abstract

Journal of Optics A: Pure and Applied Optics, Volume 7, Issue 11, pp. 660-662 (2005).

Physics

Optics

1

Scientific paper

This paper reports on the implementation of an integrated optics component acting as a multi-recombiner in an optical servo-system dedicated to control of a linear optical path modulation in a stellar interferometer. This laboratory experiment involves a two-fibre-armed interferometer with an integrated optics combiner providing two π/2 phase-shifted interferometric signals required for the error signal generation. Thanks to the control of the polarization status along the whole of the interferometric device, fringes with steady high contrasts are obtained. When operating, the servo-system allows the residual error on the optical path linear modulation to be kept lower than 3 nm RMS.

Affiliated with

Also associated with

No associations

Rating

First test on an integrated optics potential for optical path stabilization in a stellar interferometer does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.

If you have personal experience with First test on an integrated optics potential for optical path stabilization in a stellar interferometer, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and First test on an integrated optics potential for optical path stabilization in a stellar interferometer will most certainly appreciate the feedback.

Rate now

Comments { 0 }

Profile ID: LFWR-SCP-O-1634898