Computer Science – Robotics
Scientific paper
2012-01-21
19 th International Conference on Manufacturing System - ICMaS 2010, Bucarest : Romania (2010)
Computer Science
Robotics
Scientific paper
Attempts to install a rotating tool at the end of a robot arm poly-articulated date back twenty years, but these robots were not designed for that. Indeed, two essential features are necessary for machining: high rigidity and precision in a given workspace. The experimental results presented are the dynamic identification of a poly-articulated robot equipped with an integrated spindle. This study aims to highlight the influence of the geometric configuration of the robot arm on the overall stiffness of the system. The spindle is taken into account as an additional weight on board but also as a dynamical excitation for the robot KUKA KR_240_2. Study of the robotic machining vibrations shows the suitable directions of movement in milling process
Cherif Mehdi
Gérard Alain
K'Nevez Jean-Yves
Zapciu Miron
No associations
LandOfFree
Experimental Characterization of Robot Arm Rigidity in Order to Be Used in Machining Operation does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.
If you have personal experience with Experimental Characterization of Robot Arm Rigidity in Order to Be Used in Machining Operation, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Experimental Characterization of Robot Arm Rigidity in Order to Be Used in Machining Operation will most certainly appreciate the feedback.
Profile ID: LFWR-SCP-O-134804