Physics – Chemical Physics
Scientific paper
2006-03-28
Combustion and Flame 145 (2006) 272-281
Physics
Chemical Physics
Scientific paper
10.1016/j.combustflame.2005.10.0
Autoignition delay times have been measured in a rapid compression machine at Lille at temperatures after compression from 630 to 840 K, pressures from 8 to 14 bar, \Phi = 1 and for a iso octane/1 hexene mixture containing 82% iso-octane and 18% 1 hexene. Results have shown that this mixture is strongly more reactive than pure iso-octane, but less reactive than pure 1 hexene. It exhibits a classical low temperature behaviour, with the appearance of cool flame and a negative temperature coefficient region. The composition of the reactive mixture obtained after the cool flame has also been determined. A detailed kinetic model has been obtained by using the system EXGAS, developed in Nancy for the automatic generation of kinetic mechanisms, and an acceptable agreement with the experimental results has been obtained both for autoignition delay times and for the distribution of products. A flow rate analysis reveals that the crossed reactions between species coming from both reactants (like H-abstractions or combinations) are negligible in the main flow consumption of the studied hydrocarbons. The ways of formation of the main primary products observed and the most sensitive rate constants have been identified.
Battin-Leclerc Frédérique
Fournet René
Glaude Pierre-Alexandre
Minetti Rodolphe
Touchard Sylvain
No associations
LandOfFree
Experimental and modeling study of the autoignition of 1-hexene/iso-octane mixtures at low temperatures does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.
If you have personal experience with Experimental and modeling study of the autoignition of 1-hexene/iso-octane mixtures at low temperatures, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Experimental and modeling study of the autoignition of 1-hexene/iso-octane mixtures at low temperatures will most certainly appreciate the feedback.
Profile ID: LFWR-SCP-O-463708