Enhancing cuttings removal with gas blasts while drilling on Mars

Physics – Geophysics

Scientific paper

Rate now

  [ 0.00 ] – not rated yet Voters 0   Comments 0

Details

Planetary Sciences: Solar System Objects: Mars, Planetary Sciences: Solar System Objects: Instruments And Techniques, Planetary Sciences: Solar System Objects: General Or Miscellaneous, Exploration Geophysics: Instruments And Techniques, Exploration Geophysics: General Or Miscellaneous

Scientific paper

Future missions to Mars envision use of drills for subsurface exploration. Since the Martian atmosphere precludes the use of liquids for cuttings removal, proposed drilling machines utilize mechanical cuttings removal systems such as augers. However, an auger can substantially contribute to the total power requirements, and in the worst scenario it can choke. A number of experiments conducted under Martian pressures showed that intermittent blasts of gas at low differential pressures can effectively lift the cuttings out of the hole. A gas flushing system could be incorporated into the drill assembly for assistance in clearing the holes of rock cuttings or for redundancy in case of auger jamming. A number of variables such as the particle size distribution of the rock powder, the type of gas used, the bit and auger side clearances, the initial mass of cuttings, and the ambient pressure were investigated and found to affect the efficiency. In all tests the initial volume of gas was close to 1 L and the differential pressure was varied to achieve desired clearing efficiencies. Particles were being lifted out of the hole at a maximum speed of 6 m/s at a differential pressure of 25 torr and ambient pressure of 5 torr. Flushing tests lasted on average for 2 s. The power required to compress the thin Martian atmosphere to achieve a sufficient gas blast every minute or so at 10% efficiency was calculated to be of the order of a few watts.

No associations

LandOfFree

Say what you really think

Search LandOfFree.com for scientists and scientific papers. Rate them and share your experience with other people.

Rating

Enhancing cuttings removal with gas blasts while drilling on Mars does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.

If you have personal experience with Enhancing cuttings removal with gas blasts while drilling on Mars, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Enhancing cuttings removal with gas blasts while drilling on Mars will most certainly appreciate the feedback.

Rate now

     

Profile ID: LFWR-SCP-O-976358

  Search
All data on this website is collected from public sources. Our data reflects the most accurate information available at the time of publication.