Physics – Instrumentation and Detectors
Scientific paper
2007-06-13
Proceedings of the IEEE Frequency Control Symposium & European Frequency and Time Forum (01/06/2007) NA
Physics
Instrumentation and Detectors
Scientific paper
This paper reports the realization of a 5 MHz frequency difference x10 pre-multiplier, developed in the laboratory to replace an obsolete one. The principle we chose is to synthesize a 45 MHz and a 50 MHz from a reference signal and from the signal to be measured, and to subtract one to the other to generate a 5 MHz, whose precision on the measurement is increased by a factor 10. Obtained Allan variance y() at 1 s is 5.10-14 and output spectral density of phase noise floor is about -160 dBc/Hz at 5 MHz.
Jouvenceau Xavier
Lardet-Vieudrin Franck
Martin Gilles
Salzenstein Patrice
Vacheret Xavier
No associations
LandOfFree
Development of a 5 MHz frequency difference pre-multiplier for a short term frequency stability bench of the oscillators does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.
If you have personal experience with Development of a 5 MHz frequency difference pre-multiplier for a short term frequency stability bench of the oscillators, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Development of a 5 MHz frequency difference pre-multiplier for a short term frequency stability bench of the oscillators will most certainly appreciate the feedback.
Profile ID: LFWR-SCP-O-450748