Development of 3D-DDTC pixel detectors for the ATLAS upgrade

Physics – Instrumentation and Detectors

Scientific paper

Rate now

  [ 0.00 ] – not rated yet Voters 0   Comments 0

Details

20 pages, 14 figures, presented at 7th International "Hiroshima" Symposium on Development and Applications of Semiconductor Tr

Scientific paper

10.1016/j.nima.2010.04.079

We report on the development of n-on-p, 3D Double-Side Double Type Column (3D-DDTC) pixel detectors fabricated at FBK-irst (Trento, Italy) and oriented to the ATLAS upgrade. The considered fabrication technology is simpler than that required for full 3D detectors with active edge, but the detector efficiency and radiation hardness critically depend on the columnar electrode overlap and should be carefully evaluated. The first assemblies of these sensors (featuring 2, 3, or 4 columns per pixel) with the ATLAS FEI3 read-out chip have been tested in laboratory. Selected results from the electrical and functional characterization with radioactive sources are here discussed.

No associations

LandOfFree

Say what you really think

Search LandOfFree.com for scientists and scientific papers. Rate them and share your experience with other people.

Rating

Development of 3D-DDTC pixel detectors for the ATLAS upgrade does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.

If you have personal experience with Development of 3D-DDTC pixel detectors for the ATLAS upgrade, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Development of 3D-DDTC pixel detectors for the ATLAS upgrade will most certainly appreciate the feedback.

Rate now

     

Profile ID: LFWR-SCP-O-716536

  Search
All data on this website is collected from public sources. Our data reflects the most accurate information available at the time of publication.