Physics
Scientific paper
Feb 2002
adsabs.harvard.edu/cgi-bin/nph-data_query?bibcode=2002spie.4411...47r&link_type=abstract
Proc. SPIE Vol. 4411, p. 47-57, Large Lenses and Prisms, Richard G. Bingham; David D. Walker; Eds.
Physics
Scientific paper
We report on the status of an on-going project for the realization of two prime focus imaging cameras for the Large Binocular Telescope. Each channel is optimized for a specific wavelength range, namely the blue and the red portions of the visible spectrum. One of the most challenging parts of the instrument, concerning optical design and mounting issues, is represented by the optical correctors required to balance the aberrations induced by the parabolic primary mirrors, over a 0.5 degree full field of view.
Diolaiti Emiliano
Ragazzoni Roberto
No associations
LandOfFree
Designing, specifying, mounting, and aligning an 800-mm lens for an 8-m-class prime focus corrector does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.
If you have personal experience with Designing, specifying, mounting, and aligning an 800-mm lens for an 8-m-class prime focus corrector, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Designing, specifying, mounting, and aligning an 800-mm lens for an 8-m-class prime focus corrector will most certainly appreciate the feedback.
Profile ID: LFWR-SCP-O-1043931