Physics – Accelerator Physics
Scientific paper
2000-07-17
eConf C000821 (2000) MOB01
Physics
Accelerator Physics
5 figures, presented at the Linear Accelerator Conference 2000, August 2000, USA
Scientific paper
A bunching system is proposed for the initial stage of CTF3 which consists of one (two) 3 GHz prebunchers and one 3 GHz travelling wave (TW) buncher with variable phase velocities. The electron beam is emitted from a 140 KV DC gun. Since the macropulse beam current (3.5 A) at the exit of the TW buncher is rather high, inside the TW buncher one has to take the beam loading effect into consideration. By using PARMELA, it is shown numerically that the bunching system can provide the bunches whose properties satisfy the design requirement of CTF3. The 0.8 m long TW buncher working at 2pi/3 mode has two phase velocities, 0.75 and 1. The dimensions of the caities in the two phase velocity regions are proposed considering the beam loading effect. The transient beam loading effect and the multibunch transverse instabilities are studied numerically, and it is concluded that higher order mode couplers should be installed in the TW buncher with the loaded quality factor of the dipole mode lower than 80.
Duff J. Le
Gao Jian-Jian
Thiery Y.
No associations
LandOfFree
Design Studies for a High Current Bunching System for CLIC Test Facility (CTF3) Drive Beam does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.
If you have personal experience with Design Studies for a High Current Bunching System for CLIC Test Facility (CTF3) Drive Beam, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Design Studies for a High Current Bunching System for CLIC Test Facility (CTF3) Drive Beam will most certainly appreciate the feedback.
Profile ID: LFWR-SCP-O-192308