Design Of An Induction Probe For Simultaneous Measurements Of Permittivity And Resistivity

Physics – Geophysics

Scientific paper

Rate now

  [ 0.00 ] – not rated yet Voters 0   Comments 0

Details

37 pages, 7 figures, 3 tables

Scientific paper

In this paper, we propose a discussion of the theoretical design and move towards the development and engineering of an induction probe for electrical spectroscopy which performs simultaneous and non invasive measurements on the electrical RESistivity \rho and dielectric PERmittivity \epsilon r of non-saturated terrestrial ground and concretes (RESPER probe). In order to design a RESPER which measures \rho and \epsilon r with inaccuracies below a prefixed limit (10%) in a band of low frequencies (LF) (B=100kHz), the probe should be connected to an appropriate analogical digital converter (ADC), which samples in uniform or in phase and quadrature (IQ) mode, otherwise to a lock-in amplifier. The paper develops only a suitable number of numerical simulations, using Mathcad, which provide the working frequencies, the electrode-electrode distance and the optimization of the height above ground minimizing the inaccuracies of the RESPER, in galvanic or capacitive contact with terrestrial soils or concretes, of low or high resistivity. As findings of simulations, we underline that the performances of a lock-in amplifier are preferable even when compared to an IQ sampling ADC with high resolution, under the same operating conditions. As consequences in the practical applications: if the probe is connected to a data acquisition system (DAS) as an uniform or an IQ sampler, then it could be commercialized for companies of building and road paving, being employable for analyzing "in situ" only concretes; otherwise, if the DAS is a lock-in amplifier, the marketing would be for companies of geophysical prospecting, involved to analyze "in situ" even terrestrial soils.

No associations

LandOfFree

Say what you really think

Search LandOfFree.com for scientists and scientific papers. Rate them and share your experience with other people.

Rating

Design Of An Induction Probe For Simultaneous Measurements Of Permittivity And Resistivity does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.

If you have personal experience with Design Of An Induction Probe For Simultaneous Measurements Of Permittivity And Resistivity, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Design Of An Induction Probe For Simultaneous Measurements Of Permittivity And Resistivity will most certainly appreciate the feedback.

Rate now

     

Profile ID: LFWR-SCP-O-254747

  Search
All data on this website is collected from public sources. Our data reflects the most accurate information available at the time of publication.